Heating Board Zvs Induction Diy Cooker And Cooker And Coil Driver Diy Eryue Induction 120w 120w Driver Dc5-12.0v Input Zvs Moweo Anrio Induction Driver Zvs

Description

DC5-12.0V Input Voltage ZVS Induction Heating Board 120W Large Power Flyback Heating Driver DIY Cooker and Ignition Coil 2. there are components on board that are damaged. diameter of heating object should be controlled within 20mm as much as possible if heating object is too large it will be difficult to heat it into red-hot due to limited . Equipped with blue LED indicator light if indicator light is weak means supplys is insufficient and you need to replace it with a higher supplys. Make sure that all component parts are soldered correctly positive and negative poles of cord are not reversely connected load is connected and then on; do not on at no-load which makes it easily broken. current is relatively large during induction heating coil heat is also relatively large usually work for 5 minutes to off to cooling and please solder heating coil directly to printed circuit board during induction heating. 1. line is not connected properly and supply is not energized. maximum is 120W (12.0V induction heating). Push transformer 12.0V primary of 10 turns about 30W. DC5V-12.0V input voltage this voltage-ranges is working voltage not no load voltage of supplys. ( voltage exceeds 12.0V or below 5V it is not guaranteed to work properly.) width of object to be heated should be between 1/3~1/2 of inner diameter of heating coil and width should not exceed 2/3. This is a non-tapped ZVS finished-board induction heating tesla and Jacob s Ladder driver cooling fan is not included. This product is a non-tapped ZVS finished-board induction heating excluding cooling fan. maximum is 120W (12.0V induction heating). Push transformer 12.0V primary 10 turns about 30W. DC5V-12.0V input voltage this voltage-ranges is working voltage not no load voltage of supplys. ( voltage exceeds 12.0V or below 5V do not guarantee that it can work normally.) Equipped with blue LED indicator light if indicator light is weak means supplys is insufficient and you need to replace it with a higher supplys. Specifications: Name: Induction Heating Board Maximum :150W(12.0V Inductive Heating) Item size: 55 * 38 * 1.6mm / 2.17 * 1.50 * 0.06in Package size: 80 * 80 * 30mm / 3.15 * 3.15 * 1.18in Package weight: 50g / 1.76ounce Input voltage: DC5-12.0V Packing List: 1 * Coil 1 * Module