Teissuly Smart Wifi HD Camera Night Vision Wifi Remote Wireless Video Camcorders Camera With 64G Card

Description

Teissuly Smart Wifi HD Camera Night Vision Wifi Remote Wireless Video Camcorders Camera With 64G Card Smart Wifi HD Camera Night Vision Wifi Remote Wireless Video Camcorders Camera With 64G Card Feature: The internal microphone supports two-way audio Supports cards up to 128 GB Supports 2.4G HZ Wifi (Don t support 5G HZ WiFi) Supports mobile video surveillance (iOS Android) Two-way audio: Real time intercom built-in microphone and speaker instantly show the wonderful moments in your life Video playback: Support mobile client video playback view the information you want at any time Product parameters: Product Name: 30w WiFi webcam Cpu:xr872at Number of cores: single core Flash:4MB Card: up to 128GB Operating system: free RTOS Number of simultaneous access users: 4 Input: built in microphone Main frequency: 384mhz Power consumption: 300mAh (infrared on); 150mah (without infrared) Infrared irradiation distance: 3-5M Working temperature and humidity: – 10 °C ~ 50 °C humidity less than 95% (no condensation) Sensor chip: gc0308 Focal length: 2m Angle: 50 degrees Display resolution: 640x480p (30W) Day night conversion mode: day night switching Digital noise reduction: 2D digital noise reduction Video compression standard: MJPEG Video compression stream: 640x480p 12 frames Audio compression standard: g711u Audio transmission: recording Storage interface: up to 128GB Power interface: Micro USB interface Wireless standard: IEEE802 11b/g/n Frequency range: 2.4 GHz ~ 2.4835 GHz Channel bandwidth: 20MHz Security: 64 / 128 bit WEP WPA / WPA2 wpa-psk / wpa2-psk Product size:9×5.5cm/3.54×2.16 inch Package size:10x7x7.1cm/3.97×2.79×2.79 inch Gross weight:123g/0.26 lb The Package Include: 1 x Host 1 x Power line 1 x Rubber pad 1 x Use manual 1 x 64G card 1. Why can t devices be added to WiFi connection? Make sure that the device has been resets to the factory settings before adding the device: long press the res key for 5 seconds to see that the indicator flashes or the prompt tone is resetting and revert the factory settings. In addition the camera onl-y supports 2.4GHz Wi-Fi signal. If the scene S-G is routed Hao turns on the frequency mode of the router and selects 2.4G signal 2. What if the display camera is disconnected? First guard whether the power supply and network are normal and then power off and restart the camera. If the line still drops restart delete the camera in the app and add it again. Q: how to check if your camera is abnormally offline? 1. Check whether the power supply and network are normal 2. Reseat the power supply to restart the device 3. Reconfigure the camera 4. Check whether the network bandwidth at home is more than 4-M It is also necessary to insert memory card in the power-off state otherwise it will cause crash