Wooden Camera D-Box for Sony Venice V-Mount

Description

What sets the D-Box for Sony Venice V-Mount apart is its seamless integration with the Sony Venice camera system offering a custom-designed power distribution solution that enhances the camera s functionality. This specialized D-Box model is engineered to provide standardized remote start/stop capabilities hot swap functionality and a sophisticated power management system ensuring that your Sony Venice camera operates at peak efficiency.The D-Box s main unit is meticulously crafted to attach securely to the back of the AXS-R7 recorder or directly to the camera s V-Mount plate. Its power strip component mounts effortlessly to the camera s top right side utilizing a 3pin Fischer connection and the tape hook threaded hole for a stable and reliable fit. The connectors on the D-Box Power Strip are thoughtfully contoured to complement the camera s profile ensuring a perfect match and eliminating any potential cable interference.This module is designed to communicate flawlessly with the Sony Venice camera allowing the use of any ARRI standard start/stop trigger via the 3pin Fischer port including the ARRI UMC-4 and WCU-4 units. The D-Box s DC input mirrors the camera s 4pin XLR connector providing versatile power options from an AC Power Supply an External Power Plate or a VCLX block battery. This enables continuous power to both the camera and accessories during battery swaps with the system prioritizing DC input to preserve the onboard battery s charge.Innovatively replacing physical fuses the D-Box features a processor-controlled amp limit adjustable to 3.8 5.8 or 9 amps via a slide switch on the operator s side. This smart design ensures that if the current limit is exceeded only the accessory outputs are disabled allowing the camera to continue operating without interruption. A simple reset button re-enables accessory power once the current load is normalized.The D-Box s DC IN and BATT LEDs are dual-colored providing instant visual feedback on battery status: green for voltages above 12.5V red for below 12V and orange for intermediate values with flashing indicating transitional phases.Constructed with the highest quality Anton Bauer components the V-Mount assembly boasts a unibody power plate design that is both exceptionally durable and lightweight ensuring reliability and ease of use in demanding production environments.The D-Box for Sony Venice V-Mount offers a comprehensive array of interfaces including:- 1x V-Mount Power Plate- 2x 3pin Fischer at 24V with Run Stop featuring a built-in regulator to convert battery voltage to 24V supporting a maximum 3A surge and 2.5A sustained shared between connectors- 2x 2pin LEMO at 12V unregulated adhering to ARRI standard wiring- 2x D-Tap at 12V unregulated- 1x 5V USB port for powering USB devices- 1x 4pin XLR DC Input allowing hot swapping with the onboard battery and capable of powering accessories and the camera even without a brick battery attachedThe connectors utilized in this assembly while not manufactured by LEMO are produced to the same exacting specifications and are fully LEMO compatible ensuring a high level of quality and reliability for your professional shooting needs.